Become a SolarSystem re-sellers, fill out the wholesale form
Safe payment,
discreet and fast
5 Years Experience
Professional LED
Shipping
24hr Delivery

My Cart

0

Telos 0006 | 180W | GN

Available in stock: 6

€389.00
Qty:

QUICK OVERVIEW

GN Logo Grow Northern   Agent 939 LED FX Adjustable Light Hangers   

The design of the Grow Northern Telos LED Grow Lights are the culmination of many years of plant science research, experience and electrical expertise to find out what works and what doesn't work when raising plants with LED grow lighting. The Grow Northern GN Telos LED Grow Lights feature a highly robust design and have the potential to produce fantastic crops from their modest power draw. This is due to their incredible efficiency at converting electrical power into PAR light (2+ µmols per watt). Featuring sealed LED units, which are passively cooled, high powered Cree LEDs and superb full spectrum illumination, the GN Telos LED grow lights will not disappoint even the most demanding grower. With yields easily equivalent to similar or greater wattage HPS, the Grow Northern GN Telos LED Grow Lights produce less heat and offer unbeatable reliability to raise and grow healthy plants from start to finish.

The Telos series is a range of full spectrum LED systems designed and manufactured in the UK by GN for growing taller plants in both harsh greenhouse conditions and indoor farming platforms where natural light may be limited. The Telos 6 has 6 30W modules, drawing 180W and providing a PPF output of 336.78μmol/s.


Full Spectrum grow light that serves every purpose / application from VEG to Bloom. Does not only target the Chlorophyll a&b peaks in the absorption spectrum of pigments (''pink'' and ''purple'' spectra) but targets the carotenoids and other photoreceptors (which promote photosynthesis and healthy plants) as well

SPECIFICATIONS:

180W LED grow light.
▫ E
nhanced 660nm full spectrum
Minimum PPF efficiency of 2+µmol/joule. (LED V1.1)
Minimum PPF output of 360+µmol/s. (LED V1.1)
Weight: 4.8kg lamp + 1.2kg driver.

WHY CHOOSE THE TELOS 0006 ?

● One of the most advanced and innovative full-spectrum LEDs
● 1 on 1 replacement for a 400 Watts HPS light in terms of light output and final yield
● 40% Energy reduction: for example, the Telos 0008 draws 240W and has the equivalent light output of a 315W ceramic MH and a 400W HPS
● Massive biomass development during the Flowering phase (in VEG as well), resulting in HPS rivalling and exceeding yields

● The Telos models offer one of the highest levels of intensity/canopy penetration which is currently available, resulting in stronger/denser fruit development
● Completely silent because of it's passive thermal management
● Manufactured with high power LEDs from CREE
Completely sealed design with IP66 rated dust and moisture ingress protection
Last 85,000 hours at over 90% output (almost 10 years!) and there is no need for a replacement reflector thanks to the unique optics.
● High return investment
● Zero maintenance

● For full cycle cultivation (VEG to Bloom)
3-year manufacturer's warranty


    GN Indoor Spectrum                                                                                                    GN Greenhouse Spectrum
Telos 0006 GN Indoor SpectrumTelos 0006 GN Greenhouse Spectrum
   *All Photometric data is based on Telos LED V1.0. From 14/07/2018 all Telos fixtures will be using LED V1.1. We are currenlty collecting new data for this which will be availabe here soon.
   *If you wish to purchase a light with the GN Greenhouse Spectrum, please contact us at sales@ledbypassion.com.


▫ BEAM ANGLE: 93° FWHM     
▫ PF (380-780nm): 344.1 μmol/s | 1.912 μmol/joule
▫ PPF (400-700nm): 336.78μmol/s | 1.871μmol/joule
▫ VISUAL (WORKING LIGHT): Colour temperature: 3002 kelvin | Colour rendering index: 86 CRI | Luminous flux: 19,013lm
PHOTOBIOLOGY SAFETY (STN EN 62471:2009: Risk group: 0 (Exempt)

Featuring a waterproof and dustproof design, the Telos 6 can withstand any growing environment while providing a natural light for working under. The use of passive natural convection has eliminated the need for a fan, reducing noise output and significanlty increasing the life span of the light as it contains no moving parts. For more features of the Telos 10, inlcuding the Telos Spectral Graph, for more information on the Telos 10 see the data tabs below.

Quality first:
We take quality very seriously at GN to bring you a grow light that will not only work to the highest of standards but will also stand the test of time. Our partners at CREE, Mean Well and Wieland feel the same which is why we trust them to provide safe, strong and reliable components for our lights.

Quiet natural convection: Our fanless design uses passive cooling to regulate temperatures, vastly reducing noise output

Better for plants, better for you: Our blend of white and photo-red LEDs produce incredible results in yield and quality while providing a more natural working light for tending to crops.

Built to last: With no moving parts, high quality components and a robust waterproof and dustproof (to IP66) design, the Telos 0006 will continue to run reliably day and night, outdoors or indoors. It’s modular design also allows for future improvements and replacements as technology advances.


RECOMMENDED CONFIGURATIONS / COVERAGE AREA

For use in greenhouses and using multiple lights, please contact us for a recommendation.
For seedlings/microgreens (indoor growing): ≈100cm from canopy, 140cm x 140cm area
For vegetative growth (indoor growing): ≈80cm from canopy, 110cm x 110cm area
For flowering (indoor growing): ≈60cm from canopy, 80cm x 80cm area

IMPORTANT INFORMATION:

The Telos 0006 is available in a top mounted driver version which comes fully assembled. This version is best suited for ease of installation and organisation of deployments where multiple Telos systems are connected via the system link cable.

You can also purchase remote driver version which includes a 3 meter remote driver link cable. The driver in this version is detached from the chassis of the lamp section making it thinner and lighter. The remote driver link cable connects the lamp and the driver allowing you to install them up to 3 meters apart. This solution is best suited for use where there is restricted hanging distance to the plants or where the supporting mounting frame has a limited weight capacity.

If you wish to modify your top mounted driver version, the 3 meter remote driver link cable can be purchased separately here.The remote driver version does not include the 2 mounting rails which secure the driver on top of the Telos 0006 chassis, if you require these rails please contact us at sales@ledbypassion.com.

The system link cables and connectors for Telos series are now available from the store. If you wish to purchase "h" connectors and system link cables instead of the wall plug please select no power cable. Please also be aware that if you are chaining multiple Telos systems, the first system in the chain will require a wall plug.

TELOS 0006 PPFD MEASUREMENTS:


Teos 0006 PPFD Measurements

Teos 0006 PPFD Measurements

Teos 0006 PPFD Measurements

SYSTEM INPUT

▫ INPUT VOLTAGE: 90 ~ 305VAC (Autosensing) / 127 ~ 431VDC
▫ FREQUENCY RANGE: 47 ~ 63Hz
 INPUT CURRENT: 2.1A / 115VAC          0.9A / 230VAC          1.8A / 277VAC
INPUT POWER RANGE: 175-190W (non-dimmable driver)
TYPICAL POWER CONSUMPTION: 180W @Steady state operation (TA 25C)
MAX. No. of systems on 16A CIRCUIT  BREAKER: 4 units (circuit breaker of type B) / 7 units  (circuit breaker of type C) at 230VAC

DRIVER PROTECTION

OVER CURRENT: 95 ~ 108%, Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: 55 ~ 63V, Shut down and latch off o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes  down

SAFETY & EMC

SAFETY STANDARDS:
UL1012, CAN/CSA-C22.2 No. 107.1-01, UL8750(type”HL”), CSA C22.2 No. 250.0-08; TUV EN61347-1, EN61347-2-13 independent; UL60950-1, UL8750, TUV EN60950-1; GB19510.1, GB19510.14 ;IP67; J61347-1, J61347-2-13 approved
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC     I/P-FG:2KVAC     O/P-FG:1.5KVAC
ISOLATION  RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION:
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2  Class C (@ load≧50%) ; EN61000-3-3, GB17743
and GB17625.1

EMC IMMUNITY: Compliance to EN61000-4- 2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV)
 
LAMP INPUT - GN-TELOS-0006 - (Lamp only)  for use with a 3rd party constant current driver.

MAX DC VOLTAGE: 74V
TYPICAL VF (forward voltage): 33.5V
MAX RATED CURRENT (Constant current): 5.1A
▫ TYPICAL POWER CONSUPMTION (@full power): 170W @Steady state operation (TA 25C)

TOP MOUNT DRIVER

https://gn.uk/images/GN-Telos-0006/Telos-0006-dimensions.png
▫ SYSTEM WEIGHT (DRIVER+LAMP): 6KG
▫ INGRESS PROTECTION: IP66
▫ COOLING: Natural convection/passive
▫ TYPICAL TEMPERATURE RISE ABOVE AMBIENT: 40°C
▫ CHASSIS MATERIALS: T6-6063 anodised Aluminium (heatsink and rails), A2 coated Stainless steel (fasteners), A4 natural Stainless steel (hanging fittings), Plexiglass 8n (optics)
▫ MATERIAL PROTECTIONS: Bimetallic corrosion (metals), UV fade and colour (polymers)

REMOTE DRIVER KIT

Dimensions of the GN Telos 6 with Remote Driver Kit
▫ LAMP WEIGHT:  4.8KG
▫ DRIVER WEIGHT: 1.2KG
▫ INGRESS PROTECTION: IP66
▫ COOLING: Natural convention/passive
▫ LAMP RISE ABOVE AMBIENT: 40°C
▫ DRIVER RISE ABOVE AMBIENT 30°C
▫ UV PROTECTION: T6-6063 anodised Aluminium (heatsink and rails), A2 coated Stainless steel (fastners), A4 natural Stainless steel (hanging fittings), Plexiglass 8n (Optics)
▫ CORROSION PROTECION: Bimetallic corrosion (metals), UV fade and colour (polymers)

SAFETY WARNINGS

▫ THERMAL CONSIDERATIONS
- Do not touch the LED system or power supply unit whilst the system is turned on. Turn off the system and allow it to cool down for 45 minutes before handling !
- Do not cover the system whilst in use !
- Allow a minimum of 30cm clearance on all sides to allow for free flow of air !

▫ ELECTRICAL CONSIDERATIONS
- Observe the electrical specification material and correct installation instruction to avoid creating an electrical hazard !

▫ EYE SAFETY COSIDERATIONS
- Do not stare directly at the light when switched on. Doing so may cause temporary blindness or visual impairment !

▫ FAULT CONDITIONS & DAMAGES
- If any part of the Telos system is not operating correctly or is physically damaged please contact GN !

HANGERS ASSEMBLY

GN Telos 6 Hanging Kit

HANGING KIT CONTENTS

▫ 7x7 PVC coated A4 stainless steel wire rope, one end pre-assembled and tightened with a 5mm A4 stainless steel carabiner hook attached
▫ A4 stainless steel wire clamp with wingnut.
▫ A4 stainless steel 5mm carbines hooks

 GN Telos 6 Hanging Kit Assembly

 SELF ASSEMBLY END

Thread the wire rope through the wire clamp, under the locking plate and round the central pin to create a loop. Adjust the cable length and loop size to your own requirements. If you are mounting onto a frame or bar as opposed to a chain or hook fixture, create the loop around the frame or bar and then thread the rope through the wire clamp and adjust lengths.
Once you are happy with the cable length and loop size hand tighten the wingnut. Test the fixture by firmly pulling on both ends, and retighten as necessary.

INSTALLING LUMINAIRE

▫ Hang the Telos fixture at a minimum of 40cm from the top of the plant canopy. Optimal distance from the canopy for indoor top lighting applications is between 60- 80cm and between 1-2m for greenhouse applications. For large indoor or greenhouse applications please request a custom PPFD design.
▫ Ensure the frame or fitting that you are attaching can support the fixture weight. We recommend using fixings and framework that are specified to support 2-3 times the fixture weight minimum to ensure the light is secured correctly.
▫ Observe the safety warnings given above and ambient temperature limits specified in the mechanical tab.

TELOS POWER CONNECTORS
Connecting the GN Telos 6 Power Cable
CONNECTING THE INPUT CABLE

Align the white arrow on the female connector with the unlocked padlock symbol on the male connector and push the two connectors together until you hear a click and the white arrow is facing the locked padlock symbol.Disconnecting the GN Telos 6 Power Cable

DISCONNECTING THE INPUT CABLE

Twist the black casing on the female connector anticlockwise until the white arrow is pointing to the unlocked padlock and then pull the two connectors apart.

SYSTEM LINK ASSEMBLY
System Link Assembly of the Telos 6
▫ H CONNECTOR PART NO. 46.030.1255.7.GN
▫ LINK CABLE PART NO. 46.030.1000.GN (1m version) | 46.030.2000.GN (2m version)


* Its important to limit the number of linked systems per circuit breaker correctly as recommended in the electrical specifications.

How do you rate this product?

  1 star 2 stars 3 stars 4 stars 5 stars
Value
Quality
Price

Write your own review

Color Silver
Manufacturer Grow Northern
Operating Temperature No
Heat Output - BTU No
Light Output PPF No
Gewicht 1
Adjustable Spectrum No
Power Consumption 0 - 200W